Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Technical Support / Balance Label - Invisible when no difference in/out
« Last post by pbeilschmidt on October 12, 2020, 09:46 AM »
A video on our YouTube channel on 'Balance Check & Balance Label' has garnered some interest. One user asked how to make the balance label disappear when there is no difference between the input flow quantity and the output quantity. This is actually the second example shown in the video (from 02:18 to 02:30).

I'll explain this here in the forum, because it could be of interest for other users as well.

The balance label is turned on for this process (option 'Display Balance Label') in the process properties. It first appears in the default configuration with three lines (Input, Output, Difference).

You can then click the balance label and in the properties panel change to 'Custom'. This will open a small text box, where you can specify how you wish the balance label to look like.

The keywords and operators used can be found in the user manual on pages 47 to 49.

In this case the keyword string used is
Difference: {DiffSumOutMinusSumIn} {DiffUnitName}||showOnlyForBalanceWarning

The first part
Difference: {DiffSumOutMinusSumIn} {DiffUnitName}
defines the setup of the label (when visible) to show the word "Difference: " followed by the actual difference of output flows minus the input flows, and the unit (e.g. 'kg').

Following the two vertical lines (so-called 'pipes', Alt 124) are operators. Here we set
||showOnlyForBalanceWarning
to indicate that the balance label should only be displayed if there is an actual balance warning.

The triggering of the balance warning depends on the setting in the Balance Check Configuration. It can be tested for an 'Exact' match (a very tiny difference between input and output would already trigger the balance warning), or you can define an absolute value for the tolerance, or a relative difference. The Balance Check Configuration is shown in the video at from 01:00 to 01:27).

Check it out. I will see if I can make the samples from the video available for download, and will link them here.
22
General Discussion / Re: Floating licenses (concurrent licenses)
« Last post by pbeilschmidt on October 07, 2020, 10:20 AM »
Hello Wilbert,

your post has been redirected to our tech staff at support@e-sankey. They will be in touch with you shortly and assist you with the specifics of your floating license installation.

Regards,
Peter
23
General Discussion / Re: Floating licenses (concurrent licenses)
« Last post by wilbert on October 07, 2020, 09:52 AM »
I've edited the e!Sankey.exe.config, e!Sankey starts with the correctly using the licenseserver. But it only starts correctly when copied after installation and first run.

When copied directly after installation on first run the e!Sankey.exe.config gets overwritten again due to the a post config ation per user. Copied after first run it works fine.

Is there a solution to have it copied during the first run. If not we can possibly use Ivanti (appsense ) to copy it afterwards but not everyone does have Ivanti.

Regards,
Wilbert
24
General Discussion / Re: Floating licenses (concurrent licenses)
« Last post by wilbert on September 25, 2020, 09:25 AM »
Hi Peter,

Thanks for you quick answer. That's great to hear. I'm going to try it right away.

Regards,
Wilbert
25
General Discussion / Re: Floating licenses (concurrent licenses)
« Last post by pbeilschmidt on September 24, 2020, 03:29 PM »
Hey Wilbert,

happy to hear that you like the license server.

The default setup routine for the e!Sankey desktop app does not have the option to set a license server name.

To define the license server name to be used with the client installation, you can pre-configure it in the e!Sankey.exe.config. In the <configuration> section search for the element <appSettings>. Then use the line <add key="FloatingLicenseServer" value="SERVERNAME"/>.

For more details and additional parameters see the ifu Floating License Service documentation page 6
26
General Discussion / Re: Floating licenses (concurrent licenses)
« Last post by wilbert on September 23, 2020, 05:57 PM »
The licenseserver works niceley.
We've made an installation package for the client software so we can deploy this to other computers. Are there any options to set the correct license server by installation? we've found a solution possibly but that's by copying files in %localappdata%, not that nice...are there any parameters that can be used to set the correct server by installation on the clients?

Thanks in advance.

Regards, Wilbert
27
General Discussion / Tutorial Videos e!Sankey
« Last post by pbeilschmidt on September 03, 2020, 12:07 PM »
There are a number of new tutorial videos for e!Sankey available on our YouTube channel. They each focus on one specifc new feature in e!Sankey 5.


Please check them out!
28
Deutsches Support-Forum (German) / Zwischenupdate e!Sankey 5.1.2 erschienen
« Last post by pbeilschmidt on August 19, 2020, 01:41 PM »
Wir haben ein neues Zwischenupdate e!Sankey 5.1.2 bereitgestellt.

Es handelt sich um ein kostenloses Update für alle Nutzer von e!Sankey der Versionsstufe 5.

In diesem Release haben wir zwei Probleme korrigiert, die beim SVG-Export eines Diagramms in manchen Konstellationen zu eine Fehlermeldung führen konnten.

Die Liste der Änderungen sehen Sie im Change Log (Versionshistorie).

Die Verfügbarkeit des Updates wird rechts auf der Startseite im Bereich 'Version' angezeigt, wenn Sie Internetzugang haben, und der Benachrichtigungsdienst (Update Notifier) nicht abgeschaltet wurde. Klicken Sie auf den angebotenen Downloadlink, um die Installationsdatei herunterzuladen. Alternativ nutzen Sie bitte den Befehl 'Auf Updates prüfen' im Hilfe-Menü.

Anwender, die keine Möglichkeit haben, das Update herunter zu laden, sollten sich mit unserem e!Sankey Help Desk in Verbindung setzen: support@e-sankey.com

29
Announcements / New intermediate version e!Sankey 5.1.2
« Last post by pbeilschmidt on August 19, 2020, 01:38 PM »
We have released a new intermediate version v5.1.2 today.

This is a free update for all registered users of e!Sankey version 5.

In this intermediate release we have fixed two issues related to export of the Sankey diagram in SVG (Scalable Vector Graphics) format.

For a complete list, please see change log.

The availability of the update is signalled in the 'Version' panel on the right of the start page, if you have access to the Internet and the Update Notifier has not been disabled. Click on the link to download the installer file. Alternatively you can use the command 'Check for Updates' from the Help menu.

Users who have no possibility to download the update should contact our help desk at support@e-sankey.com
30
Deutsches Support-Forum (German) / Zwischenupdate e!Sankey 5.1.1 erschienen
« Last post by pbeilschmidt on August 05, 2020, 03:21 PM »
Wir haben heute ein neues Zwischenupdate e!Sankey 5.1.1 veröffentlicht.

Es handelt sich um ein kostenloses Update für alle Nutzer von e!Sankey der Versionsstufe 5.

Dieses Release beseitigt einige kleine Fehler die in der Version v5.1 entdeckt wurden, u.a. im Zusammenhang mir der Anzeige des Live Link Icons und der Nutzung von e!Sankey in einer Terminal Server Umgebung.

Eine ausführliche Liste der Änderungen erhalten Sie im Change Log (Versionshistorie).

Die Verfügbarkeit des Updates wird rechts auf der Startseite im Bereich 'Version' angezeigt, wenn Sie Internetzugang haben, und der Benachrichtigungsdienst (Update Notifier) nicht abgeschaltet wurde. Klicken Sie auf den angebotenen Downloadlink, um die Installationsdatei herunterzuladen. Alternativ nutzen Sie bitte den Befehl 'Auf Updates prüfen' im Hilfe-Menü.

Anwender, die keine Möglichkeit haben, das Update herunter zu laden, sollten sich mit unserem e!Sankey Help Desk in Verbindung setzen: support@e-sankey.com

Pages: 1 2 [3] 4 5 ... 10