Author Topic: Redraw default arrow routes  (Read 1018 times)

Offline mbdavis

  • Newbie
  • *
  • Posts: 1
Redraw default arrow routes
« on: July 17, 2018, 06:47 PM »

It would be useful to be able to automatically reset arrows to a default routing/position. For example: to be able to select all, then click a button, and all arrow routes are reset (removing all user-added points and resetting default point locations relative to processes).

Thank you,

Offline pbeilschmidt

  • Administrator
  • Hero Member
  • *****
  • Posts: 532
  • e!Sankey - show the flow.
    • Umberto - know the flow.
Re: Redraw default arrow routes
« Reply #1 on: July 18, 2018, 08:28 AM »
Hello Matt,

thanks for your post. This is indeed a good suggestion, and we will consider it for future development.

At present, setting an arrow back to its original direct routing (with no additional waypoints) is only possible for a single arrow via its context menu. This does not work if several arrows are selected.

We'll keep you posted here on this.
Peter Müller-Beilschmidt
e!Sankey Forum Moderator
ifu Hamburg GmbH