Author Topic: Formating text - showing Degrees C  (Read 299 times)

Offline ltjudd

  • Full Member
  • ***
  • Posts: 11
Formating text - showing Degrees C
« on: June 15, 2020, 02:39 PM »
Hi,
 I want to have some text on my diagram that's says C 0
i.e. shows degrees Celsius.
Is that possible in e Sankey?

Offline pbeilschmidt

  • Administrator
  • Hero Member
  • *****
  • Posts: 579
  • e!Sankey - show the flow.
    • Umberto - know the flow.
Re: Formating text - showing Degrees C
« Reply #1 on: June 15, 2020, 04:00 PM »
Hi,
I just tried it and it works for text label, process name, as well as for units
I am using the ° sign on the top left of a QWERTY keyboard
Peter
e!Sankey Forum Moderator
ifu Hamburg GmbH

Offline ltjudd

  • Full Member
  • ***
  • Posts: 11
Re: Formating text - showing Degrees C
« Reply #2 on: June 17, 2020, 02:36 PM »
I also have a qwerty keyboard, but I don't have that key.
But googled and found a key board short cut- ; ALT+0176 . Num lock must be on and you must use the numeric part of the key board, it doesn't work with the numbers across the top of the keyboard.
« Last Edit: June 17, 2020, 02:50 PM by ltjudd »

Offline pbeilschmidt

  • Administrator
  • Hero Member
  • *****
  • Posts: 579
  • e!Sankey - show the flow.
    • Umberto - know the flow.
Re: Formating text - showing Degrees C
« Reply #3 on: June 18, 2020, 09:56 AM »
Well, it probably depends on where you are located what kind of keyboard signs you get. But the ALT+0176 code is a good advice for those users who don't have the ° sign.
Peter
e!Sankey Forum Moderator
ifu Hamburg GmbH