Author Topic: Hint: red arrow lines  (Read 6521 times)

Offline pbeilschmidt

  • Administrator
  • Hero Member
  • *****
  • Posts: 500
  • e!Sankey - show the flow.
    • Umberto - know the flow.
Hint: red arrow lines
« on: December 29, 2006, 03:17 PM »
When process elements are moved in a diagram, the arrow is sometimes displayed with a red line.

This is a visual warning that either the angle of a bend of an arrow has become too small, or, that the yellow arrow point is too close to a process element. In that case the Sankey arrow can not be displayed properly, so as a warning, it is shown in red.

This hint has been added to the e!Sankey FAQ
Peter Müller-Beilschmidt
e!Sankey Forum Moderator
ifu Hamburg GmbH

Offline pbeilschmidt

  • Administrator
  • Hero Member
  • *****
  • Posts: 500
  • e!Sankey - show the flow.
    • Umberto - know the flow.
Re: Hint: red arrow lines
« Reply #1 on: January 26, 2007, 10:22 AM »
In e!Sankey 1.0 this feature can be enabled/disabled for each Sankey diagram with a separate option.
Peter Müller-Beilschmidt
e!Sankey Forum Moderator
ifu Hamburg GmbH